How Do I Build a Shed?

Building a DIY shed isn’t complicated, but it does reward preparation. Most issues people run into don’t come from the shed kit itself, they come from rushing the setup, skipping checks, or working under unfavorable conditions.

Easyshed DIY kits arrive flat-packed and are designed to be assembled even by everyday DIYers. In this blog, we’ll walk you through the general process from prep work to anchoring, so you know what to expect before you pick up a drill.

Pro Tip: If you’re just setting up a concrete slab, you will find a fully detailed rebated concrete slab plan in every Easyshed kit assembly manual. If you haven’t purchased yet or are waiting on your shed to arrive and need this info sooner, you may reach out via any of our support channels.

Before You Start

Take a few minutes to set yourself up. Clear your schedule and set aside some time for your new project. The few minutes you allot will save you hours in the long run.

1. Read your assembly instructions from start to finish. Don’t skim. Knowing what’s coming helps you avoid rework.
2. Check the delivered components against the customer checklist in your manual. Do this before booking an installer or starting assembly.
3. Choose a clear, level site for the shed and confirm that your base is ready.
4. Work with a mate or two! An extra set of hands will definitely be handy when putting the panels together during wall and roof assembly.
5. Avoid assembling your shed in wet or windy conditions. Wind gusts can bend panels, throw alignment out, and create safety risks.

Safety First

Let’s not forget that shed panels are made of steel. Steel has edges. Respect that.

• Wear safety gloves when handling panels
• Use safety glasses when drilling
• Lift correctly and get help with heavier components

Handling the Flatpack Kit

Shed kits are heavy and tightly packed. Our delivery partners will make it a point to drop it off a secure area within your vicinity with respect to Operational Health & Safety Guidelines.

• Move the box flat wherever possible to prevent components shifting inside
• If the box is too heavy, open it and unload the contents one at a time
• Lift panels carefully to avoid scratching or damaging parts underneath

Tools You’ll Need

Most DIY shed kits require standard tools. Have these ready before you begin:

• Power drill with Phillips head driver
• Drill bits
  • 3mm steel bit
  • 10mm steel bit for concrete fixings
  • 10mm masonry bit for concrete fixings 
• Measuring tape
• String line
• Pop rivet gun
• Step ladder

Some shed kits may require additional tools. Always check your shed-specific assembly instructions.

Setting Up Your Work Area

You’ll be assembling wall and roof panels before they go onto the shed.

• Choose a flat, level surface
• Use an elevated platform
• Trestles with secured planks make panel assembly easier, cleaner, and kinder on your back

Refer to your assembly instructions for panel dimensions when setting these up.

Shed Assembly Overview

Every model is slightly different, but the general build flow looks like this:

1. Assemble the Wall Panels
   1. Overlap the sheets and secure them with channels and flashings
   2. Do not start drilling until your sheets are set
   3. Finish flush where applicable and pay attention to any sheeting parts that require pushing in or flexing
2. Assemble the Front Panel
   1. Measure to ensure sheeting and door frame align
   2. Pay particularly close attention to this step as this will determine the quality of your door set-up
3. Align the Door Panels
   1. Ensure doors are properly aligned prior to setting channels and jambs 
4. Assemble the Roof
   1. Closely follow instructions on roof assembly
   2. Note components that need to be joined together like the ridge beam and roof sheeting 
5. Erect the Shed
   1. With a buddy or two, assemble the walls, front panel, door, and roof
   2. Use a timber block when drilling the corners, it helps keep the sheeting stable so it can bite through the layers

Hooray! You’ve just built your shed kit. Next thing you want to do is to make sure it’s not going anywhere.

Anchoring Your Shed

Your shed must be anchored immediately after installation. Unanchored sheds are vulnerable to wind damage and may pose safety risks.

Rebated Concrete Slab (Our Recommendation)

• Helps prevent water ingress
• Provides maximum structural integrity
• Uses concrete anchoring kits

Standard Concrete Slab

• Suitable for existing slabs
• Requires anchor brackets or concrete bolts

Anchoring Pegs

• Temporary and designed for soft soil
• Ideal if the shed location isn’t permanent yet

Ready to Build?

DIY kit assembly is a straightforward and satisfying process. Imagine being able to build a steel structure with your own two hands. Prepare, work methodically, follow the instructions, and don’t rush.

If you hit a snag, contact us. Our support teams are ready to help and are available almost 24/7.

If DIY isn’t your thing or you’re time poor, but need a kit assembled for you, we also have an on-going collaboration with Airtasker. Every Easyshed purchase gets you a $30 OFF coupon for the next Easyshed task you book.

A well-built shed starts with good prep, and if you’ve made it to this part, we’re confident to say that you’re ready to build.